Lubricity Evaluation Monitor

The Lubricity Evaluation Monitor (LEM) is a laboratory device designed to evaluate lubricants by direct comparison. It determines the coefficient of friction between an interchangeable wellbore sample (casing, formation, sandstone, etc.) pressed against a rotating steel bob while immersed in a circulating cup of test fluid.

Features

• Pneumatic ram applies side load pushing the bob against the sample
• Periodic refresh of test fluid by pulling bob away from sample at definable intervals
• Clamp allows samples of casing, formation, sandstone, etc. to be tested in the same fixture
• Computerized data acquisition and control
• Software
  - Operator inputs rotational speed, side load, and refresh period
  - Test archive provides access to historical data
  - Graphs rotational speed (RPM), torque (in-lb), side load (lb), and coefficient of friction with respect to time

Specifications

• Sample cup capacity: 350 mL
• Range of Mud Weights: 0.83 - 18.0 lbs
• Torque Transducer Maximum Range: 100 lbf-in
• Torque Resolution: +/- 0.1% of full scale combined
• Maximum Side Load: 60 lbf
• Maximum Rotational Speed: 200 RPM
• Speed of Circulating Pump: 20 - 500 RPM
• Calibration: Coefficient of Friction of Water = .32 - .36
• Test Cell Material: Acrylic
• Bob Material: 4140 Steel - Rockwell Hardness of 37

Requirements

• Electrical Supply: 220 Volts
• Air Supply: 60 - 100 PSI

Part Number

• #113-00